What can we help you with?
< All Topics
Print

DNP WCM Plus Module Wireless Printing Format Error

Updated

WCM Module • Wireless Print

Photos print in the wrong format (stretched / cropped)

Quick checklist to correct 2×6 or 4×6 print formatting from the WCM server and your booth software.

Step-by-Step Resolution

http://192.168.4.1

WCM Server
  1. Connect your device to the WCM’s Wi-Fi, then open WCM Server at http://192.168.4.1.
    If the page won’t load, confirm you’re on the WCM network.

    If the Wi-Fi-network asks for a password, use: dnp12345

  2. In Printers, select the connected printer and open Settings.
  3. Under Print Formats / Media, check the desired format(s) (e.g., 2×6) and
    uncheck all others, then click Save.



    Tip: You can save more than one printing size
  4. (Optional) From the WCM server, run Print Test Page.
    This confirms the server and driver mapping are correct.
  5. (Optional) To connect to another Wi-Fi, go to the Wi-Fi tab on the server and connect to the desired one.
  6. In your booth software, set the layout/template to 2×6/4×6 and print again.
    Template and driver size must match. Mismatches cause stretch/crop.
Expected result: 2×6 photo strips render without stretching or partial cropping.

Quick QA

  • Still stretched? Re-save the template at native 2×6, ensure no “fit to page” option is enabled in software/driver.
  • Wrong orientation? Match portrait/landscape on both WCM and template.
  • Borderless issues? Disable driver auto-expand/borderless if it clips the edges.
  • Not printing? Reboot the printer and reinitiate the connection to the Photobooth.