How to Assemble Allure Photobooth

📦 Unboxing & What’s Included

• Head unit
• Base plate
• Middle mounting bracket (for legs)
• Power cable
• Set of screws & thumb screws
• 2 leg sections per side

Full System includes:

• iPad
• Flash unit

🛠️ Leg Assembly

1. Align and join each leg section pair using the provided screws. Insert the screw from the wooden side first.
2. Attach the leg pairs to the middle mounting bracket, ensuring the metal nut faces downward.
3. Secure each leg using the thumb screws.

📱 Installing the iPad

1. Set the head unit on a soft surface and remove the magnetic face plate.
2. Unscrew the wing nuts and remove the metal brackets.
3. Place the iPad inside the frame, then reattach the brackets with wing nuts, flat side touching the iPad.

🔌 Internal Wiring & Connections

Included Accessories:

• iPad charger
• Dummy battery (Canon R100)
• Flash rod
• Power cable
• Camera mounting screw

Additional Items Required:

• Power strip (3+ outlets)
• USB hub with power delivery

1. Plug the power cable into the head unit and route it down the internal cavity.
2. Insert the iPad charger into the USB hub, then connect the hub to the power strip.
3. Insert and route the dummy battery cable for the camera through the inside.

📷 Camera Setup

1. Insert the SD card and dummy battery into the camera.
2. Attach the camera to the mounting bracket using the included screw.
3. Use a USB-C to USB adapter (not included) to connect the camera to the USB hub.

🔩 Final Assembly

1. Mount the head unit to the center of the stand using the long screw.
2. Route and manage all cables internally.
3. Attach the flash rod using the included 1/4\”-20 screw and mount the flash unit.
4. Connect the iPad to the USB hub using a 90° angled adapter (recommended).
5. Reattach the front face panel.

✅ You’re All Set!

Your Allure Photo Booth is now fully assembled and ready to use. Be sure to test the camera, iPad, and flash before your event.